Add section profile

9.1.4.3. Add section profile

With this command you can change the cross-sectional profile of the walls. You can create a wall with a slanting plane or place a wall under an exterior entablature.

Select one side of the wall to be modified in the floor plan. The program will automatically create the cross-sectional profile of the selected wall. (If you have modified a wall profile before, the program will display the current cross-section of this wall.)

Options:

NEXT	You can change corner points of the developed cross-section to specify the appropriate reference point. Pressing the TAB on keyboard execute this command.

Place the developed cross-section of the wall (point 1).

Specify a closed profile with which you can define the new cross-section of the wall.
Select any option to specify the profile in the Toolbox – Profile definition tool.

&For a description of the Profile definition, see Chapter 8.2. Specifying profile.

Place the cross-section profile on the wall

2If you wish to use a predefined profile, choose the Select from the list command and you can use any of the predefined elements of the profile library.
To create a new profile, use menu Modeling/Object Closed profile command; and you can save your profiles in the profile library.